RMC Grades

Need quality concrete for your next project?

M10 Grade Concrete

Lean Mix Concrete for Levelling & Foundation Sub-Base.

  • Characteristic Strength (28 Days): 10 N/mm² (1450 PSI).

  • Mix Proportion / Design: Approx. 1:3:6 (Nominal mix for non-structural works).

  • Target Application: PCC (Plain Cement Concrete) bed under footings, mud-slabs, flooring sub-base, levelling course, and drainage trenches.

  • Key Property: Prevents structural concrete contamination from subgrade soil and moisture absorption.

M65 Grade Concrete

High-Strength Concrete (HSC) for High-Rise Heavy Load Columns.

  • Characteristic Strength (28 Days): 65 N/mm² (9425 PSI).

  • Mix Design & Additives: OPC 53 Grade + Fly Ash/GGBS + PCE (Polycarboxylate Ether) Superplasticizer. Water-Cement Ratio: ~0.28 – 0.30.

  • Target Application: Heavy-load lower-floor columns in 20+ story residential/commercial towers, post-tensioned bridge girders, flyover piers, and heavily loaded industrial floors across NCR.

  • Key Property: High initial strength gain, low permeability, and resistance to creep and shrinkage.

M85 Grade Concrete

Ultra-High Strength Grade for Mega Infrastructure & High-Pressure Structures.

  • Characteristic Strength (28 Days): 85 N/mm² (12,325 PSI).

  • Mix Design & Additives: Triple-blend binder (OPC + Silica Fume + Micro-Silica). Specialized graded quartz/basalt aggregates. Water-Cement Ratio: < 0.25.

  • Target Application: Super-tall towers (35+ floors in Gurugram/Noida), deep basements facing high groundwater pressure, heavy-duty logistics hubs, and long-span flyover decks.

  • Key Property: Extreme density, near-zero porosity, resistance to chemical attack and sulfate action.

M100 Grade Concrete

Specialized UHPC Class Concrete for Critical Architectural & Infrastructure Load-Bearing Elements.

  • Characteristic Strength (28 Days): 100 N/mm² (14,500 PSI).

  • Mix Design & Additives: Micro-silica + quartz powders + high-dose PCE hyper-plasticizers + optional micro-synthetic/steel fibers. Highly calibrated aggregate packing. Water-Cement Ratio: ~0.20 – 0.22.

  • Target Application: Metro rail viaducts, heavy-load transfer girders, shear wall bases of 50+ story skyscrapers, nuclear/industrial containment slabs.

  • Key Property: Maximum compressive strength, structural section size reduction (less steel & smaller column footprint), extreme durability against chloride penetration.

Get A Quote Today

Get premium ready mix concrete backed by certified quality, reliable service, and timely delivery for every construction project.